Read Engineering Drawings and Tolerances

Worksheets

7 worksheets, one set per chapter, each as a web reference, a print-friendly blank form, and a worked fictional example. This purchase pays for the instruction and these original worksheets, not exclusive access to information found elsewhere.

W01Drawing Identity and Geometry
Record a drawing’s controlling identity and its view geometry before judging a single dimension.
Blank worksheet Worked example
W02Feature Register
Convert every scored dimension on the drawing into an unambiguous register entry with real limits.
Blank worksheet Worked example
W03Fit Calculator on Paper
Predict clearance, transition or interference directly from stated hole and shaft limits.
Blank worksheet Worked example
W04Worst-Case Stack
Write a stack-up equation, select the correct endpoints, and check a design requirement against the real worst case.
Blank worksheet Worked example
W05GD&T Interpretation
Read a feature control frame completely, and calculate a simplified position value and its MMC bonus.
Blank worksheet Worked example
W06Inspection Report
Classify a full set of reported measurements against stated limits, under one explicit decision rule.
Blank worksheet Worked example
W07Clarification and Revision Log
Write a clarification request that states the ambiguity, its effect, and the exact decision needed.
Blank worksheet Worked example

← Back to Read Engineering Drawings and Tolerances